During 16th July 2016 to 2 August 2016 , a training program on “ Designing, Fabrication & Installation of Wind mill”  was conducted at Vigyan ashram, Pabal campus. This training was conducted in collaboration with Mr. Jorge Ayarza ,a wind mill expert from Auroville (Pondicherry) and co-founder of Minvayu’s (http://www.minvayu.org/).  Total of 22 students were attended this training workshop and learnt wind-mill designing skill while building 2 separate wind mill 0f  2.7 KWH and 1 KWH . The bigger wind mill will be used to operate 2 HP agriculture motor pump while smaller one for domestic electrification by our Alumni Mr.Geetaprasad Kadam. Wind mill